Description: The model 5740 is designed to test axial and radial leaded capacitors. The fixture is attached directly to the meter with no test leads. It can be used with many capacitance and LCR meters including HP 4278A, Agilent 4288A, Agilent 4268A, Agilent 4263A/B, Keysight E4980A, Keysight E4981A and others.
- Frequency: 50 HZ to 10 MHZ
- Operating Temperature: 0°C to 55°C
- Compensation and Measurement: Open compensation is recommended before measurement. Loosen the thumb screws, separate the contacts as required to accommodate the DUT and tighten the thumb screws. Perform open compensation. After performing open compensation, use a wire or shorting bar to short the two contacts and perform short compensation. Insert the DUT leads into the contacts and measure the value of C / DF